===============================================================================

	PacScope v1.02 DEMO version

		by Layer Co., Ltd.

===============================================================================

July 18, 2003


Thank you for downloading PacScope DEMO version.
PacScope is an integrated network monitoring and analyzing tool.

1.  System Requirements
* OS: Windows 98/NT/2000/XP
	Windows NT/2000/XP users MUST have administrative 
	privileges to install and to run the program.
* CPU: Pentium 133 or faster recommended
* Memory:  64MB or more recommended
* Monitor Resolution:  XGA or higher
* Network Interface Card necessary

<For laptop computer users>
Check power management settings of your system 
not to fall into [System standby] or [System hibernates] during capturing.
PacScope can not capture any packets 
while the computer is in  [System standby] or [System hibernates]. 

2.  Key features
* Captures network packets on the network 
* Decodes captured packets (IP, TCP, UDP, NetBIOS and others)
* Saves, Loads, and Prints captured packets
* Monitors packets and traffic on the network
* Logs traffic history to the file
* Transmits packets generated by easy-to-use Packet Editor
and more.

3.  Limitation for DEMO version
PacScope is a shareware (not free software).  You may use PacScope
[DEMO version] for evaluation purposes 
for a period 30 days without registration.
If you wish to use PacScope after the 30-day evaluation period,
the purchase of registered license with a payment is required.
The following limitations may apply [DEMO version] of PacScope.
* Capturing time is limited for 10 seconds
* Capturing is restricted after 10 minutes of program running 
* Hard Disk Capture is unabled
* Captured packets can not be saved
* Captured packets can not be printed
* Gathering network information is limited for 10 minutes
* Generated packets can not be transmitted
* Decoder loads only 30 packets
* TCP sequencer loads only 15 packets

4.  Installing PacScope
Simply double-click Setup.exe and follow the Installer through the rest
of installation process.
*Windows2000/XP users need to install PacScope Packet Capture Driver.  
See the PacScope Packet Capture Driver Guide included in the same 
folder with the setup file.
**Windows98/NT users DO NOT need to install PacScope Packet Capture Driver.  

5.  Registration
Your downloaded program is a DEMO version.
If you wish to use full functions of PacScope without limitations, 
you need to pay applicable license fee then you will be allowed to 
download a full version product and received your license number.
<Procedure>
1)  Visit registration section of our website at
    http://www.pacscope.com/pacs/registration.html
2)  Choose your preferred payment method and process to pay.
3)  After the completion of your payment, you will be received 
    download information to obtain a full version of PacScope and 
    your license number via e-mail usually within 48 hours.

If you have any question, send an E-mail to: info@pacscope.com
or visit our website at:  http://www.pacscope.com

<Doc Rev.00006>

